Skuteczność broni czarnoprochowej

Broń czarnoprochowa

Moderator: Moderatorzy

Wiadomość
Autor
Awatar użytkownika
Apolinary Koniecpolski
Posty: 2179
Rejestracja: 19 lipca 2008, 11:05
Lokalizacja: Smolanka

Re: Skuteczność broni czarnoprochowej

#166 Post autor: Apolinary Koniecpolski » 15 grudnia 2011, 23:49

Co prawda jest to tylko fragment materiałów reklamowych pewnego producenta, ale na tyle sensownie napisany (i zilustrowany) że warto go dorzucić do dyskusji:
Forster Products pisze:A Guide To Gunsmiths' Screwdrivers

Fig. 1 Choose screwdrivers designed specifically for the mounting of scope sights and other common gunsmithing requirements. Gunsmiths' screwdrivers will be properly dimensioned to handle those unique tasks. Nothing is more frustrating than a bruised scope mount, a distorted screw, or the white metal showing through the finish of an expensive scope which has been subjected to a damaging mounting job. (Note: Our screwdrivers are not the double wedge type, swedged on a punch press as shown in figures 2, 3 and 4.)

Fig. 2 & 3. A design such as this will damage your work if the screw is difficult to remove.

Fig. 4 The double wedge type transmits its torque to the top of the screw slot. With such a small area contacting the screwdriver, the screw will be scored or one of the sections of the screw head will break off if heavy pressure is applied. This wedge shape also tends to back the driver out of the screw slot.

Fig. 5 illustrates what happens when too narrow and thin a blade that is too narrow is used.

Fig. 6 The Forster screwdriver in fig. 6 is ideal. The torque is applied at the bottom of the slot where the screw is strongest. The blade fills the slot. The blade is the same width as the shank as shown in fig. 1. It has the same radius so it will not damage your work or mark the screw.
Obrazek
Nie chcę mieć racji, w zupełności wystarczy że Was poróżnię lub choć rozdrażnię.
W sprawie prawdy proszę zgłaszać się do walizy Obrazek

Phouty
Posty: 5468
Rejestracja: 25 sierpnia 2008, 05:05
Lokalizacja: Terytorium Pod Obcą Okupacją

Re: Skuteczność broni czarnoprochowej

#167 Post autor: Phouty » 16 grudnia 2011, 01:00

Zgadza się! Wiele firm obecnie produkuje śrubokręty....okay, okay....wkrętaki, dosłownie dostosowane do danej śruby w konkretnym urządzeniu, na przykład w mocowaniu lunety.

Widać to na samym spodzie poniższej listy.
http://media.midwayusa.com/pdf/Instruct ... 0Chart.pdf
No good deed goes unpunished.
Μολων λαβε
"Przykro mi ale demokracja daje tylko złudzenie udziału we władzy." [bartos061]

ODPOWIEDZ